Skip to content
  1. Free Shipping on Orders over $75 | Home of Enduro Plasticsâ„¢

Number Plate Light Bar Installation Instructions

Required Tools: #40 and #18 drill bits or equivalent, drill, masking tape (optional), 2.5mm Allen wrench, 6 inch ruler or tape measure, permanent marker.

Warning! Sharp tools are used in this installation. Take proper precautions to prevent injury!

  1. Check to make sure the position of the light bar does not interfere with your front brake line!
  2. Remove your number plate and mark the middle along the top edge.
  3. With the light rotated downward in its mount brackets, line up the light bar center bolt with the mark you made on the number plate.
  4. Do your best to level the left and right sides of the light. This can be done with masking tape, a marker, and a 6 inch ruler. If you are struggling with this, rest the light bar mounts on the number plate and it will be level.
  5. insert the #40 or equivalent drill bit into the brass insert and gently mark your holes. (do not drill).
  6. Once the pilot holes are marked, remove the light bar and mounts from the number plate and drill the pilot holes. You can use the rubber tapers as a drill guide.
  7. Place the light mount back in place and double check the pilot holes for alignment. If everything lines up, use the #18 or equivalent drill bit next. If one or more holes do not line up, use a slightly bigger pilot bit to correct the position of the hole and then repeat this step.
  8. Using the provided screws, install the rubber taper adapters on the front and the back of the number plate. The flat surfaces of the adapters should be parallel.
  9. Place the light bar mounts on the back of the plate and tighten the screws with a 2.5mm Allen wrench.
  10. Plug in your headlight adapter.
  11.  (SAE Wire Harness Option) A: Install the light switch behind your number plate with either the adhesive tape or provided screws. B: Install the provided wire harness in an area that the plug can reach your light bar. The red wire goes to the positive battery terminal and the black wire goes to the negative battery terminal.
  12. Go get dirty!
Light on center mark
Level holes
Rubber taper as drill guide
Install Spacers parallel

Finished

Ride Fearless. Ride Smarter. Ride Longer.

We started making motorcycle parts for ourselves because we wanted something better. Now we want to provide something better for you too!

Ride with confidence. Ride with 3DC Moto Parts.

A rider-centric approach to off-road motorcycle parts, offering high-quality, American-made products designed to enhance your riding experience.

Offering all of our cool stuff to you.

3DC Moto provides a rider-centric approach to off-road motorcycle parts, offering high-quality, American-made products designed to enhance your riding experience.

We combine expert engineering with a passion for the sport, delivering durable, performance-enhancing parts using our trademarked Enduro Plastics™ at competitive prices. 

All backed by fast shipping and exceptional customer service.  3DC Moto offers products with superior durability and protection, ensuring your bike can handle the toughest trails. 

Vision

We love to ride! We love to build things! And our goal is to offer premium protection for critical offroad motorcycle parts.

Mission

With 3DC Moto, you gain more than just parts; you gain a partner who is as invested in your riding experience as you are. Let us help you take your riding to the next level.