Rotopax/Tark II Clamshell Installation Instructions
Required Tools: Side Cutter, File
Warning! Sharp tools are used in this installation. Take proper precautions to prevent injury!
- Remove ratcheting lock ring from fuel can using side cutters and file down the indexing tabs on your gas can.
- Using the keys, remove the lock cylinder from the clamshell.
- Open the clamshell and install over the gas cap in a way where the bottom lip of the clamshell is underneath the bottom of the gas cap.
- Close the clamshell and make sure it rotates freely.
- Insert the locking cylinder into the clamshell with the latch tab toward the gas cap.
- Go get dirty!
These red tabs may need to be filed down
Clamshell closed and locked
