Chainsaw Mount Mods for Enduro Engineering Mounts

Do you like your Enduro Engineering chainsaw mount but want to unlock it's full potential?
If you ride with a EE chainsaw mount on your motorcycle and want to upgrade your mount so it is more secure and capable, these mods will make you fall in love!

Options:
#1 Fork Mounts. This kit has Four, non-marring fork mounts that bolt on using existing slots in the rear panel of the EE back plate. The cable guides are built in to the Clutch side mounts. Once you have these, it takes about a minute to install on your bike. Your fork tubes will thank you for this one! (No drilling required)

#2 Saw Pads. Two Rubber pads snap in place under the saw and behind the saw. This cushions the saw from impact and reduces wear and tear on everything else. The pad under the saw uses existing holes and the back plate will have to be drilled in Four places to install the rear pad. (Drilling required)

#3 Light bar with KTM headlight (white) plug. Don't get caught in the dark! The light bar is 4800 lumens at 6500k color at approximately 4 amps. The light is rated IP67 waterproof and has a shatter proof lens with spots and floods. This plugs right into your factory KTM headlight connector. (Drilling required)

#4 Light bar with Husqvarna headlight (black) plug. Don't get caught in the dark! The light bar is 4800 lumens at 6500k color at approximately 4 amps. The light is rated IP67 waterproof and has a shatter proof lens with spots and floods. This plugs into the factory Husky headlight connector. (Drilling required)

#5 Light bar with a two part harness and switch. Don't get caught in the dark or with a dead battery! This kit includes a fused, SAE wiring harness that plugs into the light bar assembly. The blue lighted on/off switch, which is IP65 waterproof rated, comes assembled in a mount that can be located to the back of the number plate (or any other flat’ish surface) by using provided bolts or 3M outdoor rated tape. The light bar is 4800 lumens at 6500k color and approximately 4 amps. The light is rated IP67 waterproof and has a shatter proof lens with spots and floods. This SAE harness can be used for battery tenders when unplugged from the light! (Drilling required)

#6 Fuel and Oil Bottle Mounts. Don't ruin the contents of your pack with fuel and oil! This kit moves weight out of your backpack and gives you the ability to carry one 750ml (25oz) 2 Stroke fuel bottle as well as one 530ml (17oz) chain bar lube bottle. One bottle holder bolts on each side panel. We recommend bolting the smaller bottle to the brake side panel to help balance the mount. These bottles are sold separately, or you can use your own as long as they are smaller than 3 inches in diameter. You can get a good deal on BSR bottles on Amazon or you can purchase the bottles from us here. Our rubber type straps hold the bottles securely in place. (No drilling required)

Go help clear trails with more confidence and style.

Features:

• Made in the U.S.A.
• Light weight
• Easy to install